Shanghai Runpaiq Technology Co., Ltd.
Green Building, Low Carbon Emission
Add to Cart
What is it made of: ultrasonic sensor:
The ultrasonic transducer of high frequency, which is made up of an active element, a backing, and wearplate. Its active element is a piezoelectric or single crystal material which converts electrical energy to ultrasonic energy. It will also then receives back ultrasonic energy and converts it to electrical energy.
Product data sheet
| Technical parameters | |||||
| Model | CF17A | Center frequency | 975 + 30 KHz | Static capacity | 500 PF + 20% |
| Resonance impedance | <110 Ω | Protection | IP68 | Work temp. | < 85 ℃ |
| Pressure | >3.0 Mpa | Transmit beam angle | 5 – 10 | Receive sensitivity | >250 mv (half wave) |
| Housing material | Titanium alloy | Emit surface | Dia. 17 mm | Mounting surface | Dia. 21 mm |
| Seal | Epoxy encapsulation | Wiring | Center | Wire type | Dia. 2.5 mm dual core |
| Technical parameters | |||||
| Model | 17B | Center frequency | 975 + 30 KHz | Static capacity | 500 PF + 20% |
| Resonance impedance | <110 Ω | Protection | IP68 | Work temp. | < 90 ℃ |
| Pressure | >3.0 Mpa | Transmit beam angle | 5 – 10 | Receive sensitivity | >300 mv (half wave) |
| Housing material | SS304+polymer | Emit surface | Dia. 17 mm | Mounting surface | Dia. 21 mm |
| Seal | Epoxy encapsulation | Wiring | Center | Wire type | Dia. 2.5 mm dual core |
Parameters
Different options: