Shanghai Runpaiq Technology Co., Ltd.
Green Building, Low Carbon Emission
Add to Cart
Brass boiler zone valve, two way ball valve DN15 for heating system
Product Description
The boiler zone valves are consisted of brass or stainless steel mini motorized ball valve. They're used as a way of separating different zones in the heating system. This makes it possible to direct water around all of the radiators or just some of them. There are a number of different types of boiler zone systems which can give you a lot of control over your heating.
Features
1. Extreme ong service life span ;
2. Manual Override, the valve can be operated when power failure;
3. Mini dimension and position indicator
4. Good sealing performance, IP65 enclosure
Application
Advantages
| No. | Ours | Normal products |
| Valve shaft seal | Quadruple seals | Dual seals |
| Nut seal | Auto super anaerobic glue coating, Consistent torque tightening | Manual anaerobic glue, unevenly, non consistent torque tightening |
| Seal between valve body and housing | Seal groove | none |
| Torque | Smoothly and light | Heavy, non consistently |
| Drainage | Yes | none |
Technical data
| Material | brass, stainless steel, SS304, 316 |
| Operation pressure | PN16 |
| Type | mini motorised ball valve |
| Operate Pressure (Mpa) | PN10 |
| Torque (NM) | 2 |
| Dia range | DN15-40 |
| Open/close (S) | <13s depends on actuator motor |
| Work volt. (V) | DC3-6V, DC12V, AC220V |
| Media temp (℃) | 0-90 / 200 |
| Control | automatic motor actuator |
Factory show
