Shanghai Runpaiq Technology Co., Ltd.

Green Building, Low Carbon Emission

Manufacturer from China
Active Member
4 Years
Home / Products / Zone Heating Valves /

Central Heating Motorised Valve , Thermostatic Electric Zone Valves 3.5 NM

Central Heating Motorised Valve , Thermostatic Electric Zone Valves 3.5 NM

Ask Latest Price
Brand Name :Runpaq
Model Number :50K1-T2-15
Certification :CE
Place of Origin :China
MOQ :50 pieces
Price :USD25/piece (>1000pcs) / USD26.5 (50-1000 pcs)
Payment Terms :L/C, T/T, D/A, D/P, Western Union
Supply Ability :200000 sets/month
Delivery Time :15-21 days
Packaging Details :box + maste carton + pallet
Diameter :Full diameter or reduce port: DN8-32
Work Pressure :10bar / PN10 / 1.0 Mpa / 150 psi
Work current :<80 mA
Voltage :DC5V / DC12-24V / AC85-230V / AC220V
Torque :3.5 NM
Open/close time :< 5 seconds
Product name :underfloor heating motorized valve;underfloor heating zone valve
Application :HVAC, Hydronic Heating and cooling, boiler, geotheramal systems with water source heat pumps
Contact Now

Add to Cart

Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
View Product Description

boiler zone valve/ Zone heating valves for heating and cooling unit, with thermostat

Product Description

The electric zone valves on central heating and cooling systems, heating boilers, it controls hot water heat or cold water. In all cases, when the zone control valve is fully open, an "end switch" inside the valve tells the heating system's circulator to begin operating, causing hot water to flow through the zone.
Our zone control valve is a range of 2-way motorized zone valve, which is with motor actuator for use in heating and cooling system. The brass or stainless ball valve is available in DN15-32, PN10 with thread connection. The actuator is controlled by 2-point signal and is recommended for on/off function, available for 230V AC, 50/60Hz or DC power supply.

Features

  • Metal gearbox and metal gear design, low noise, perform reliably
  • Long service life: more than 100000 circles
  • Electric limit and machinery limit design, located accurately, avoid gear run continuously.
  • Mufti-angle assembling, easy to install
  • Float ball structure, no leakage, especially suitable for heavy pollution conditions.
  • Can work in boiler water room, good substitution for solenoid valve

Application

  • HVAC system heating, ventilation, air conditioning
  • Baseboard/radiant heating
  • Convectors
  • Fan coil units
  • Underfloor heating
  • Unit ventilators
  • VAV reheat

Advantages

  • Sturday valve body with reasonable structure design, and best material to be used
No. Ours Normal products
Valve shaft seal Quadruple seals Dual seals
Nut seal Auto super anaerobic glue coating, Consistent torque tightening Manual anaerobic glue, unevenly, non consistent torque tightening
Seal between valve body and housing Seal groove none
Torque Smoothly and light Heavy, non consistently
Drainage Yes none

Central Heating Motorised Valve , Thermostatic Electric Zone Valves 3.5 NM

Technical data

Model 50k
Work Amp (mA) Max80mA
Protection IP65
Power (W) <5
Operate Pressure (Mpa) PN10
Torque (NM) 3.5
Dia range DN8-32
Open/close (S) < 8s
Work volt. (V) DC3-6V, DC12V, AC/DC9-24V, AC220V, AC85-265V
Media temp (℃) 0-90
Control CR02
Dimensions
Valve body material Connection port Diameter D L H W
(mm) (Kg)
Brass Both female thread full diameter DN8 8 46 31 0.402
DN15 15 57 38 0.478
DN20 20 71 45 0.559
DN25 23.5 72 49 0.648
Both female reduced diameter DN10 8 46 31 0.401
DN20 15 66 38 0.493
DN25 20 72 47 0.653
DN32 25 86 60 0.865
3 way vertical DN15 12 63 49 0.48
DN20 15 66 53 0.537
CPVC Both male thread DN15 15 60 47 0.357
DN20 20 72 51 0.385
Brass 3-way horizontal DN8 6 52.6 39 24.5
DN15 12 72 55 39
DN20 15 86 63.5 44
DN25 15 97 68.5 43.5
Central Heating Motorised Valve , Thermostatic Electric Zone Valves 3.5 NM

  • Three wires and two control points (DC3-6V / DC12V / DC24V)

Central Heating Motorised Valve , Thermostatic Electric Zone Valves 3.5 NM

1. Connecting SW to OPEN, the valve opens , getting the position ,automatically power off, the valve remain fully open position

2. Connection SW to CLOSED, the valve close , getting the position ,automatically power off, the valve remains side passes position (fully closed)

Note: AC24V/AC220V can only be used for 50K series electric valves

Factory show

Central Heating Motorised Valve , Thermostatic Electric Zone Valves 3.5 NM Central Heating Motorised Valve , Thermostatic Electric Zone Valves 3.5 NM Central Heating Motorised Valve , Thermostatic Electric Zone Valves 3.5 NM

China Central Heating Motorised Valve , Thermostatic Electric Zone Valves 3.5 NM for sale

Central Heating Motorised Valve , Thermostatic Electric Zone Valves 3.5 NM

Inquiry Cart 0